.IPB18757
BRONZE PROPORTIONING INJECTOR
Bronze proportioning injector
Description
The proportioning injector operate according to the Venturi principle: pressurised water goes through the converging and diverging nozzles and creates a vacuum which causes the suction of the emulsifier.
It is fit with a non-return clapper ball, which prevents water from flowing back into the emulsifier tank. The dosing valve regulates the percentage of the foam-water mix: from 0% to 6%. The control valve allows a constant emulsifier rate during pressure variation.
The range goes from 200 lpm to 800 lpm with a pressure loss of 35% and offers various possible connections.
Construction in bronze (body) and aluminium alloy (couplings).
It is fit with a non-return clapper ball, which prevents water from flowing back into the emulsifier tank. The dosing valve regulates the percentage of the foam-water mix: from 0% to 6%. The control valve allows a constant emulsifier rate during pressure variation.
The range goes from 200 lpm to 800 lpm with a pressure loss of 35% and offers various possible connections.
Construction in bronze (body) and aluminium alloy (couplings).
Caractéristiques
11 other products in the same category:
