.IP18410
PROPORTIONING INJECTOR
Proportioning injector
Description
The proportioning injector operate according to the Venturi principle: pressurised water goes through the converging and diverging nozzles and creates a vacuum which causes the suction of the emulsifier.
The injector is fit with a non-return clapper ball, which prevents water from flowing back into the emulsifier tank. The dosing valve regulates the percentage of the foam-water mix : from 0% to 6%.
The control valve allows a constant rate of mixture during pressure variation.
The range goes from 200 lpm to 800 lpm with a pressure loss of 35% and various possible connections.
Construction in aluminium alloy with red polyester coating.
The injector is fit with a non-return clapper ball, which prevents water from flowing back into the emulsifier tank. The dosing valve regulates the percentage of the foam-water mix : from 0% to 6%.
The control valve allows a constant rate of mixture during pressure variation.
The range goes from 200 lpm to 800 lpm with a pressure loss of 35% and various possible connections.
Construction in aluminium alloy with red polyester coating.
Caractéristiques
11 other products in the same category:
