New
New
G100AA00
PETZL COLLINOX ANCHORS - PER 10
PETZL COLLINOX bonding anchors, forged stainless steel (pack of 10). Indispensable equipment for setting up a reliable anchor point on concrete or rocks.
Description
PETZL COLLINOX glue-on anchors can be used to create reliable anchor points on various concrete or rock supports.
- Once the crumbling part of the support has been cleaned, drill a hole of the right diameter and depth.
- Clean the hole with a brush and blowgun.
- Use glass bulb glue or mixing glue gun.
- Push the anchor all the way in to the shoulder, turning it at least 10 times to ensure proper mixing (glue should be visible).
- Take into account the drying time of the glue used before loading.
- Check that the glue overflow around the mooring is hard and that the mooring does not rotate.
Material: forged stainless steel (durable and corrosion-resistant)
Dimensions: 10 x 70 mm
Weight: 95 grams
Drying time: 40 minutes to 10 hours
Pre-testing recommended on :
- Granite rock, gneiss above 80 MPa
- Hard limestone over 80 MPa
- Medium-grained limestone and sandstone 80 MPa to 45 MPa
- Soft rock below 45 MPa
- High-quality concrete above 50 MPa
- Medium-quality concrete 25 MPa to 50 MPa
- Once the crumbling part of the support has been cleaned, drill a hole of the right diameter and depth.
- Clean the hole with a brush and blowgun.
- Use glass bulb glue or mixing glue gun.
- Push the anchor all the way in to the shoulder, turning it at least 10 times to ensure proper mixing (glue should be visible).
- Take into account the drying time of the glue used before loading.
- Check that the glue overflow around the mooring is hard and that the mooring does not rotate.
Material: forged stainless steel (durable and corrosion-resistant)
Dimensions: 10 x 70 mm
Weight: 95 grams
Drying time: 40 minutes to 10 hours
Pre-testing recommended on :
- Granite rock, gneiss above 80 MPa
- Hard limestone over 80 MPa
- Medium-grained limestone and sandstone 80 MPa to 45 MPa
- Soft rock below 45 MPa
- High-quality concrete above 50 MPa
- Medium-quality concrete 25 MPa to 50 MPa
Caractéristiques
- Material acier inoxydable forgé
- Certification EN 959
16 other products in the same category:
