.141DN1002M
ASPIRAL REINFORCED RUBBER
Hose for industrial water suction
Description
Very robust, the Ref 141 hose is designed for industrial water suction.
Equipped with 4 textile plies, it accepts high pressure peaks and is therefore used for discharge when a small bending radius is required.
It supports a depression higher than 0.9 bar.
Its ageing in water and its resistance to abrasion are excellent.
In diameter 45, 70 and 110, it allows the manufacture of suction lengths NF EN ISO 14557 for civil protection equipment.
Inner tube: smooth SBR rubber
Reinforcement: 4 textile plies and metal spiral
Covering: abrasion and weather resistant SBR rubber
Permissible pressure: 0.9 bar
Appearance: fabric
Temperature: 90° C maximum
Special feature: possibility of cuffs
Standard Production length: 2 meters (Others length on request)
Color: black
Equipped with 4 textile plies, it accepts high pressure peaks and is therefore used for discharge when a small bending radius is required.
It supports a depression higher than 0.9 bar.
Its ageing in water and its resistance to abrasion are excellent.
In diameter 45, 70 and 110, it allows the manufacture of suction lengths NF EN ISO 14557 for civil protection equipment.
Inner tube: smooth SBR rubber
Reinforcement: 4 textile plies and metal spiral
Covering: abrasion and weather resistant SBR rubber
Permissible pressure: 0.9 bar
Appearance: fabric
Temperature: 90° C maximum
Special feature: possibility of cuffs
Standard Production length: 2 meters (Others length on request)
Color: black
Caractéristiques
- Length 2m
- Temperature 90°C maximum
16 other products in the same category:
