.RLNWMO20
"MAN OVERBOARD" NAUTICAL DUMMY
Man overboard rescue training manikin
Description
The secret to the performance of this manikin is the balance between the weighting and the buoyancy - the tough Nylon mesh carcass allows the water to penetrate rapidly and after a few minutes, the legs will drop below the surface, resting at an angle of about 45 degrees with just the head and shoulders visible above the surface.
This model can float horizontally or vertically to simulate a live person or dead body - it takes seconds to move the foam pieces in the overalls to achieve this. *Adult and Youth manikins only
Bright orange overalls and SOLAS reflective tape on the head make the manikins very conspicuous in open water.
Polypropylene strips allow flexibility in and out of the water but prevent the manikin from bending in half when using stretchers or recovery devices.
Now has a Polypropylene strip extending from the back up through the neck and into the head to add additional support to the neck
Protective overalls and boots are user-replaceable and greatly extend the life of the manikin
Nylon mesh - conforms to BS3408/20
Reinforced P.V.C - conforms to BS3408/20 and ISO 7854 1984
SOLUS reflective tape - compliant with US Department of Transportation specification USCG 46 CFR, section 164.018 and International Maritime Organisation (IMO) resolution A.658(16).
Polypropylene plastic (conforms to DIN EN ISO 1873, Teil 1)
Made in the UK all manikins conform strictly to our ISO9001:2015 standards.
This model can float horizontally or vertically to simulate a live person or dead body - it takes seconds to move the foam pieces in the overalls to achieve this. *Adult and Youth manikins only
Bright orange overalls and SOLAS reflective tape on the head make the manikins very conspicuous in open water.
Polypropylene strips allow flexibility in and out of the water but prevent the manikin from bending in half when using stretchers or recovery devices.
Now has a Polypropylene strip extending from the back up through the neck and into the head to add additional support to the neck
Protective overalls and boots are user-replaceable and greatly extend the life of the manikin
Nylon mesh - conforms to BS3408/20
Reinforced P.V.C - conforms to BS3408/20 and ISO 7854 1984
SOLUS reflective tape - compliant with US Department of Transportation specification USCG 46 CFR, section 164.018 and International Maritime Organisation (IMO) resolution A.658(16).
Polypropylene plastic (conforms to DIN EN ISO 1873, Teil 1)
Made in the UK all manikins conform strictly to our ISO9001:2015 standards.
Caractéristiques
- Weight 5, 8, 20 et 40 kg
- Tailles De bébé (0,7m) à adulte (1,8m)
16 other products in the same category:
